Transplanting Cannabis Seedlings Into Jiﬀy Pellets If your initial germination process was successful, it’s time to move your cannabis seedlings into jiﬀy pellets. The goal of this process is Germinating weed seeds in peat pellets is an easy process that doesn’t require a lot of work Are you thinking about growing cannabis from the comfort of your own home? Here’s everything you need to know about cannabis seed germination.
Transplanting Cannabis Seedlings Into Jiﬀy Pellets
If your initial germination process was successful, it’s time to move your cannabis seedlings into jiﬀy pellets. The goal of this process is to provide new sprouts with a medium in which they can establish a small, but strong root zone.
New growers often skip the ﬁrst stage of germination and sow cannabis seeds directly into moist soil, only later to be disappointed when seeds cease to sprout. This fruitless process can be caused by two reasons. First, if the soil is too wet, seeds can become waterlogged and turn to rot; second, cannabis seeds germinating in soil often have an unpredictable trajectory. If sown too deep, for example, the taproot may search for oxygen above ground and send the rest of the plant deeper into the soil. With the paper towel method, however, cannabis seedlings have the best chance of successful germination. Once the taproot is exposed, growers can avoid root rot, successfully predict the trajectory of the plant and safely transfer seedlings into their next home.
Ready to get growing? Watch our YouTube Series or read the following article to learn more about transplanting cannabis seedlings into jiﬀy pellets.
Step #1: Soak Jiﬀy Pellets
Jiﬀy’s are small, cost-eﬀective, compressed peat pellets. Because of their size and highly porous nature, Jiﬀy pellets are ideal for germination. Begin the process by preparing a nutrient solution of B vitamins and water. B vitamins reduce plant stress during transition phases of growth, promote root development, and usually contain absorbable elements like potassium. About 2 liters or half a gallon of water will be suﬃcient for hydrating four Jiﬀy Pellets.
After the nutrient solution is prepared, toss your Jiﬀy pellets in to soak. Wait 5-10 minutes for the Jiﬀy’s to adequately absorb the nutrient solution. You can check if your Jiﬀy’s are prepared by gently squeezing the outside of the pellet. If any pieces of peat haven’t been loosened, place them back into the nutrient solution for another 5 minutes. Once the Jiﬀy pellets are thoroughly soaked, gently wring them out and place them to the side. Like the paper towel method, the goal of this process is not to bog down your seedlings with a soaking wet environment, but rather provide them with a moist, dark area, with high levels of humidity.
Step #2: Transplanting Seedlings Into Jiﬀy Pellets
Examine each sprout: if the taproot is at least ¼” long, they are ready to be transplanted into jiﬀy pellets. Carefully take each seedling and place them in their respective pellet with the taproot facing down. Tweezers may be useful in this task, as long as they have been sanitized beforehand with boiling water, alcohol or hydrogen peroxide. Finally, gently cover the seed shell in a small amount of soil. Do not compress any of the topsoil covering the seed. The point of layering the shell in soil is just to provide your germinating seeds with an adequate amount of darkness and humidity.
Step #3: Place Seedlings in a Germination Tray and Dome
Take your expanded jiﬀy pellets and place them in a standard 10” x 20” germination tray. Then, cover them with an appropriate 4” or 7” humidity dome. Since your seedlings will be living in this tray for the next 10-14 days, there are several tools available to help manage and control the environment. A light source, heating mat, and digital thermometer/hygrometers are just a few examples of tools needed to stabilize the environment within this tray. Here are some of the features of each piece of equipment:
Choose a low-wattage, low-intensity light source. T5 ﬂuorescents or LED lighting is a great option to consider. At this stage, the light source is only there to encourage upward movement, not vigorous growth.
A heating mat’s purpose is to raise the temperature of a small space to an adequate level. Especially during the colder seasons, a heating mat may be essential for providing your seedlings with a constant temperature of at least 70 degrees Fahrenheit (21C). Also, consider purchasing a heat mat temperature control gauge to maximize the eﬃciency of your tools.
The purpose of a digital thermometer/hygrometer is to measure the constant temperature and humidity of a given space. Some monitors even come with extended probes, allowing you to measure the temperature/humidity of speciﬁc sections of the humidity dome. For the best outcome, attempt to keep your seedlings in an environmental range of 70-75 degrees Fahrenheit (21-24C) and a minimum 70-80% relative humidity
Step #4: Set It, But Don’t Forget It
Over the next few weeks, your seedlings will begin to develop a root zone that will spread through the jiﬀy pellet. Also, the “true leaves” of your seedlings will begin to appear. Unlike the “sucker leaves” which ﬁrst emerge from the seed shell, true leaves will be much larger, resemble typical cannabis leaves, and indicate future growth, progression and plant establishment.
This period of growth will be slow: in some cases, the transition period can take up to 14 days. So, don’t worry if you can’t see measurable growth overnight. Set your plants up for success, leave them be, but don’t forget them. Monitor your tools, control levels of temperature and humidity, and if necessary, spray your plants with a light solution of B vitamins or liquid seaweed solution. Be patient and soon enough, your seedlings will be ready to continue growing as established plants during the vegetative stage.
Join us for more information about growing cannabis at home! For more information on transplanting your cannabis seedlings into jiﬀy pellets, contact our team at Grow Your Four.
Buy Items in the blog
After your cannabis is dried and processed, it’s time to think about curing, burping, and re-humidifying your crop to the perfect smoking and vaping consistency. Unlike drying, the process of curing cannabis involves slowly aging flowers in airtight containers to help seal in unique flavors and aromas. Much like the
It’s true – trimming cannabis is one of the most monotonous jobs in the garden. But much the like process of knitting handmade fabrics, hand-trimming your crop is a special and necessary part of cultivation. Not only does hand-trimmed cannabis deliver a superior cut, but each flower during the hand-trimming
By the end of week 8, your plants will likely be ready for harvest. Harvesting cannabis involves the important process of carefully drying plants to preserve and protect unique ﬂavors and aromas. Much like the process of aging ﬁne wine, carefully drying your crop has the potential to exaggerate the
How to germinate cannabis seeds in peat pellets
Not all germination methods are equally successful. Some will disappoint you, while some can surprise you in quite a positive way. One of those methods that tends to provide awesome results and is quite simple and easy to achieve is germinating cannabis seeds in peat pellets.
Before we head onto the actual process of germinating marijuana seeds in peat pellets, let’s check out what the benefits of using jiffy peat pellets are and why you should choose this method of germination.
What are the Benefits of Peat Pellets?
If you’re not yet sure whether this method is suitable for you, check out some of the main benefits of using peat pellets to germinate your seeds below!
- They are easy to work with.
Peat pellets are super easy to work with. They are lightweight and highly compressed and they transport quite well. They can be planted into small and large containers or directly into the ground.
- They are the full package.
Peat pellets are a container and a medium all in one. They meet all the requirements your seeds need to grow with a consistent quality. They require less labor, less water and provide faster and better germination.
- They are eco-friendly.
Using peat pellets means growing in a medium that’s safe for the environment since its biodegradable, unlike other popular choices like rockwool.
Step-by-Step Guide to Germinating Marijuana Seeds in Peat Pellets
Now that you’re familiar with the benefits of using peat pellets to germinate your cannabis seeds, let’s go over the entire process step-by-step so you can consistently record higher and faster levels of germination and get a more consistent quality and results.
Jiffy pellets have easy to follow instructions, particularly suitable for novice growers. Here are the main steps you need to follow when germinating marijuana seeds in peat pellets:
Step 1: Get your container and your pellets ready
While you can use any type of container, ideally you should get a pellet tray that acts as a pellet holder and can typically contain up to 25 pellets per tray.
Make sure your pellets don’t overlap and have small borders between each so they can extend as they soak up the water.
Step 2: Cover with water
Pour water onto the tray to expand the pellets. Use warm water (up to 95°F/35°C) to help them expand faster. While you can use both tap or distilled water, we recommend using distilled or purified water so as not to expose the seeds to harmful substances which can be found in tap water, such as certain minerals. Keep on pouring water as they soak it in, allowing them to rise up and fully extend. Repeat the process as long as it takes until your pellets have fully risen and are ready for planting. Once they do, remove all of the excess water from the tray and head onto the next step.
Step 3: Place your seeds
Once the pellets have fully expanded, take your seeds and place one in each pellet. Place them in the middle at about 3/8 of an inch (1cm) or so. Don’t put them in too deep as this will prevent them from sprouting.
Once you plant the seeds, cover them with the excess peat from the sides and cover the tray with a lid or a plastic wrap. If you decide to purchase the specialized peat pellet tray, you’ll see that it comes with a humidity lead that goes on top, so use that one to cover your tray.
Step 4: Continue watering
You will need to water the pellets in around a week after planting your seeds. Just make sure not to water them from the top down as this can disturb the germination process. Keep your tray by a window or a warm, sunny spot and just wait for the seeds to sprout in a few days.
Step 5: Transplant
After about two weeks your seeds should be ready for planting. Then, you can plant each pellet directly in the soil or in a pot, depending on your preference.
As you can see, germinating weed seeds in peat pellets is an easy process that doesn’t require a lot of work. However, if you still have some unanswered questions on the subject, we hope this list of some of the most commonly asked questions on the subject can help answer some of your dilemmas.
Is there a certain way to plant cannabis seeds in peat pellets?
Yes, there is. To make sure you get the best results, you’ll want to place your seeds about 3/8th of an inch (1cm) deep, as if you plant them deeper within the pellet, they may not sprout.
Can I germinate autoflower seeds in peat pellets?
Absolutely! Germinating autoflower seeds in peat pellets is a simple and easy process and it follows the same steps as germinating any other marijuana seeds.
How many days does it take to germinate a cannabis seed?
Once planted, the seeds should start to sprout within two days, but it may take up to a week. Once they’ve sprouted you can remove them from the tray and plant them in soil at any point after they’ve sprouted, although we recommend waiting for a week or two to make sure they are ready for planting.
What if I don’t have access to peat pellets?
While this is quite an effective and sustainable way of germinating seeds, there are a few other ways you can use to achieve the same results. Germinating marijuana seeds in water is also a perfectly viable and safe option and can provide excellent results, which is great when you don’t have pellets at your disposal and are looking for an alternative solution.
Germinating Marijuana Seeds: Step by Step Guide
The life of any plant begins with germination , making this process the most important in your plant’s life. You will undoubtedly come across many different methods for germinating your marijuana seeds when conducting your online research. Some may be successful, but others will disappoint you. The following guide will provide you with an effective list of practices and critical information home marijuana growers can utilize to help ensure they’re preparing the best crop possible to produce some smooth, enjoyable hits.
Please continue reading to find out everything you need to know about cannabis seed germination. And if you’d like even more information on the wonders of growing cannabis from the comfort of your own home, please consider exploring the top-quality grow kits provided by our cannabis industry experts at a Pot for Pot today , along with their range of expertly written educational articles.
What Does it Mean to Germinate Cannabis Seeds?
Germination is the natural process by which a particular organism grows from a spore or seed. In this case, the term is referring to the sprouting of a cannabis seedling from a seed , which can be encouraged by help from the cannabis grower. Germinating your seed is the first crucial step in the cannabis growing process, and it can be surprisingly simple with the right tools. Even though the process of getting a seed to sprout and bear a healthy plant is a challenge for some growers, it doesn’t have to be when you start with a grow kit from a Pot for Pot. With our help, your plant will sprout and start growing in no time!
What to Understand About Germination and Endosperm
The first thing to understand is that seeds come naturally equipped with their own starting food- endosperm. It plays an essential role in ensuring your plant reaches its full potential. As a seed begins to sprout, this starchy blanket around the embryo provides nutrients to a growing plant. If it doesn’t seem like a lot, don’t be fooled- there’s enough starch there to feed humans.
That starch is only part of what you’ll need, however. You’ll also need to provide specific temperatures to germinate your seeds. Ideally, you’ll want to keep the temperature around 25 degrees Celsius (77 F) for the best results.
What Happens During Germination?
The process of germination is when plants start to sprout from their seeds, and it’s relatively the same throughout the plant kingdom. A little bit of moisture makes the tiny plant inside crack open its outer shell and sprout upwards while pushing its root downwards. Once it’s cracked through the shell, you’ll need to give your little babies a bit of water and some love for the fun to begin.
Your seeds will need the right conditions to break through their shell and continue to grow, however. Otherwise, they may take longer to germinate. Our seedling starter kit can help you create those perfect conditions. It makes sure your seed has just the right amount of water (so that it stays moist, but not too wet). Once it has germinated and grown enough to sprout its third set of leaves, simply move your young plant into the a Pot for Pot fabric pot for continued healthy growth.
It’s best to germinate seeds indoors where you can better control the temperature. Seeds are more likely to sprout in a warm and stable environment.
How to Sprout Marijuana Seeds
Marijuana plants start as a seed . That tiny thing resembling a pebble is a whole plant securely stored with a supply of food to support itself for a few days. In the germination process, the food converts into sugars, which the plant uses to cut the shell and develop its root. Identifying a healthy seed is, therefore, the first thing that you need to do.
The sprouting process is the foundation of your marijuana plant, so do not take this step lightly. Other than starting with a high-quality seed, you need to ensure that your conditions are optimal. It is challenging to optimize the natural mediums, which is why a medium such as Jiffy Pellets comes in handy.
Different Ways to Germinate
There are many ways to germinate seeds, but we recommend using peat pellets. Not only is it the safest way to start your seeds, but it’s also the easiest. Jiffy is hands down one of the best brands of peat pellets on the market , and if you are thinking about germinating using peat pellets, this is the way to go. This method is great for avoiding the risk of damaging new roots. We’ll get into more detail about the wonders of Jiffy Pellets in a later section of this article. But first, let’s explore the benefit of peat pellets in general, along with some other mediums growers can use to facilitate effective cannabis germination.
Peat pellets are comprised of decomposed vegetable matter which your plants will absolutely love. When you add water, it expands, creating a nutrient-dense medium that is a good replacement for soil. When the roots are visible, you can transport the whole pellet into a Top Soil mix with fortified a Pot for Pot Superb Soil so it can continue developing without accidentally causing root damage.
Basic Mediums for Marijuana Germination
There are many different germination methods, and results will vary. Here are some basic ways to sprout your seeds :
Sprouting marijuana seeds in regular soil is a common practice. Soil is a natural medium and can protect the seeds as they develop their fragile roots. For this option, be sure to start with the right type of soil for marijuana. Use a seed starter or fertilized potting soil with a pH of around 6- 6.5. Soil has both minerals and spores that support growing marijuana plants. Soil can have too many nutrients for fragile seeds so take care when doing this method that your soil isn’t too hot.
Water is another method for sprouting a marijuana seed. Soak seeds in a cup of water in a dark place for 24 to 48 hours. Plant after 48 hours whether or not the seed has sprouted a tail or not. The advantage of using water is that you can ensure adequate moisture for germination. The plant will also have an easier time breaking its shell compared to when it is in a soil medium. It is really important that your water is chlorine free and ideally pH neutral to slightly acid. (with a pH of 6.5- 7.0)
This mineral wool comes from volcanic rock and other materials such as limestone and basalt. To make this material, the ingredients are heated into molten lava and rapidly spun into threads. These threads then undergo compaction, curing, and finally, cutting.
While Rockwool is a suitable environment for germination, you’ll need to adjust it a bit for growing marijuana. First, you’ll need to add fertilizers- around 600 parts per million. You’ll also need to reduce the pH, which is too high to support sprouting. It’s also a bit dangerous to use, so please wear gloves and protect your mouth and eyes while handling it.
Would you like to save money and reduce the number of trips you need to take to your local dispensary to stock up on marijuana? Consider trying out the potential of your green thumb by investing in one of our top-quality cannabis growing kits today.
The Best Marijuana Germination Medium: What to Know About Jiffy Pellets
For the best results, you need a precise understanding of how to get started growing your marijuana plant. As stated a few sections above in this article, choosing Jiffy Pellets as your initial medium is probably the best way to go. Every a Pot for Pot kit includes a Jiffy Pellet, so you don’t need to worry about purchasing it separately, and if you run out, you can order some refills or one of our expansion kits .
What is a Jiffy Pellet and How Does it Work?
A Jiffy Pellet is a natural, biodegradable growing medium conveniently available as little compact discs that help sprout seeds into seedlings. Jiffy Pellet composition includes peat moss, a mesh, and other ingredients such as lime, fertilizer, and ammonium to help seedlings grow.
Jiffy Pellets are both a container and a potting mix for sprouting seeds. Peat moss is a medium that’s rich in organic materials, and the mesh securely holds the peat moss in place. Using Jiffy peat pellets either indoors or outdoors is an effective method to grow healthy and robust marijuana plants.
To use a Jiffy pellet, water it first. Then, place your marijuana seed a bit below the surface level. When the plant is strong enough, transplant the entire pellet to a larger pot.
What are Jiffy Pellets Composed of?
To help you better understand the advantages that Jiffy Pellets can provide to your seed germination efforts, let’s take a moment to explore the various beneficial components they contain and how they work to benefit your plants.
Technically, a Jiffy peat pellet is a small disc made of compressed material. However, Jiffy pellets enlarge up to seven times their original size when you add water , creating a suitable environment for the sprouting process. The fine netting keeps the Jiffy pellet ingredients in one place as your seed sprouts. Said ingredients include:
Peat is an organic medium that provides plenty of nutrients for sprouting seeds. It is made from sphagnum peat moss, which has a high water-holding capacity as a result of its fluffy and light texture. Peat provides excellent root aeration, making it easy for roots to grow without interference.
Lime, Ammonium, and Fertilizer
Jiffy pellets are primarily made from peat moss. However, peat moss on its own is not ideal for sprouting seeds. That’s why they also include lime, which raises the pH of the medium. Jiffy Pellets have a pH of 5.5, compared to peat moss’s 4.4.
Jiffy Pellets also include fertilizer that provides seedlings with all their required nutrients for the first 1-2 weeks. You won’t need to add anything else as your seed sprouts. After transplanting, you can apply fertilizer, if desired.
How Big are Jiffy Pellets?
Jiffy pellets come in diameters of 24 mm, 33 mm, 41 mm, and 70 mm. The sizes vary to cater to the various needs of different seedlings. The larger Jiffy Pellet sizes are convenient to handle and are ideal for marijuana.
How to Germinate With Jiffy
Jiffy pellet instructions are easy to follow and will take you less than 20 minutes to set up, ensuring you’ll be able to start your cannabis seed germination project quickly and easily without wasted time or effort.
Choose Your Container
The first step is to place your pellets in a container. Ideally, you can use a Jiffy pellet tray. Ensure they do not overlap and leave a small border for water retention.
Water Your Jiffy Pellets
You can use tap water or distilled water. Keep in mind, tap water may have chlorine, which is harmful to your plant and can cause it to dry out faster. However, you don’t have to buy distilled water to prevent chlorine problems. Evaporate the chlorine by pouring your water, and let it rest for some time. Use very warm water, around 95oF, to help the pellet expand faster.
Plant Your Weed Seeds in the Jiffy Pellets
Place the seed in the middle of the enlarged pellet. Don’t place the seed too deep, or it will not sprout.
Cover Your Seeds
To avoid moisture loss, use a plastic cover – this usually comes with the pellets. You can also use plastic wrap. If you don’t have a Jiffy pellet dome, you will need to water again after around seven days. Avoid dropping water from the top; otherwise, you will disturb the developing seeds.
Transplant Your Plant into Some Soil
The seeds are usually ready for transplanting after two weeks. To do this, simply make a hole in the soil and place your pellet directly in that spot.
An Alternative to Jiffy Pellets to Consider
Coir is a popular alternative to Jiffy pellets , with Coconut Coir leading the trend. This material is made from coconut husks. If you choose this medium, use a coir Jiffy Pellet tray to hold it. Coir has water retention capacities similar to peat, but not as good, and it is more airy which means you will want to water it more often and make sure it is compact.
Coir also repels insects and is reusable , so it can help you if you choose to expand your growing operations to include more cannabis plants.
What to do After Germination
After your seeds have germinated, they need to go into a pellet so the roots can spread out and grow. You may be wondering just how far in the jiffy pellet the seeds should be planted once it has germinated. You’ll want to drop the seed about a half-inch to an inch. If the seed has not sprouted, it’s okay to place it in the jiffy pellet – as long as it has soaked for at least 12 hours, but no more than 24 hours. If it has sprouted, drop the white root downward, so that the head of the seed is about an inch below the surface.
Damping-Off With Hydrogen Peroxide
Once your seed becomes a tiny plant, it’s now known as a seedling. This is great, except that seedlings are very delicate. You’ll want to be on the lookout for the number one seedling killer: damping off. Damping-off occurs when something (such as fungi or other diseases) causes the nutrients in your plant to stop being transported properly. The stem becomes mushy and falls over, and your plants will die young. The risk increases when there is minimal direct sunlight and air circulation, combined with warm temperatures and high humidity.
Eventually, your plant will be able to protect itself, but until then hydrogen peroxide is an excellent solution to this problem before it can begin. Hydrogen peroxide provides oxygen to the soil and reduces the chances of fungus spores developing.
To effectively prevent damping off, combine 1 tsp. of hydrogen peroxide with 2 cups of water. Use this solution to water the plants. Or you can soak the seed in 1% hydrogen peroxide before planting.
Frequently Asked Questions: Marijuana Seed Germination & Jiffy Pellets
Before signing off with this article, let’s take a few more moments to cover some key points included in this article to ensure you understand the basics of everything you’ll need to know when advancing forward in the seed germination process. We’ll also cover the answers to a few common questions new home-growers may want to address before getting started.
Germination is the process of seeds developing into new plants
All weed seeds need water, oxygen, and proper temperature in order to germinate.
It takes 1-2 weeks for weed seeds to germinate
We love jiffy pellets. They mimic the plant’s favorite natural medium; good soil.
The Bottom Line: What a Pot for Pot Can do For You
Germination can be tricky, but not if you have the right tools. The quality seedling starter kit from a Pot for Pot makes going from seed to seedling fairly effortless. It’s included in all our kits, or you can purchase it on its own. Simply select the seeds and provide some love and we’ll provide everything you need to grow healthy plants.
Do you enjoy an occasional marijuana smoke break but want to avoid costly trips to the local dispensary every time your bud stash starts to run low? Consider growing your own marijuana from the comfort of your home with one of our top-quality cannabis growing kits.
Learn how to cultivate marijuana. Find the best marijuana growing advice for seed germination, cloning, pruning, trimming, and curing to help maximize your yields.